Magic sculpt epoxy is a versatile and widely-used material that is popular among both professional artists and hobbyists. It is an epoxy putty that can be sculpted by hand and then cures to a hard and durable finish. One of the key features of magic sculpt epoxy is its ability to adhere to a wide range of surfaces, including wood, metal, plastic, and ceramics. This makes it an ideal material for both indoor and outdoor projects. It can be used to create sculptures, masks, props, and other three-dimensional art pieces. Magic sculpt epoxy is easy to work with and can be shaped and molded in various ways.
Magic sculpt epoxy is easy to work with and can be shaped and molded in various ways. It has a smooth and clay-like consistency which allows for fine detail work and intricate designs. It can also be colored using pigments or painted after it has cured.
M02054x2 MOREZMORE 10 lb BROWN Magic Sculpt Sculp Epoxy Clay Model Putty
Northern wing of the estate.
A stone-paved path leads to Morezmore Studio.
Inside you find:
10 lb of Magic Sculp
(sometimes called Magic Sculpt)
by Wesco
Two-part Epoxy Putty
Sculpting and Modeling Compound
Welcome to Magic Sculp - the two-part epoxy putty specifically designed to meet the needs of modelers, crafters and sculptors alike. One of the few epoxies that will smooth out with water.
Its grain structure is finer than any other product available and will not shrink or crack even when formed in large structures. It can be shaped by hand or with modeling tools, sanded, carved, painted; you can attack it with a grinding tool and the cured material will not break apart or lose its shape.
Magic Sculp will cure at room temperature.
- Magic Sculp will adhere tenaciously to most any surface, and can be sanded and painted when hard.
- Easily mixed (Resin and Hardener slightly color coded: mix until one solid color).
- Good adhesion to almost all clean surfaces, including glass.
- Excellent malleability.
- Good sculpting media: as easy to work with as oil clay.
- Surface may be smoothed out with water.
- Water and soap clean up.
- Completely inert when cured.
- Accepts all types of paint.
- Surface may be sanded or ground when cured.
- No measurable shrinkage.
- Good for repairing anchoring bases and armature rods.
- Indefinite shelf life.
- Very forgiving on mixing ratio. Ratio may be varied to slow or speed up time.
- Repairs low pressure leaking pipes of plastic, cast iron, stainless steel, and copper.
Not only Magic Sculp is great for building armatures and bases because of its superiour strength but it has fine enough grain to actually sculpt from it - see the 2" tall Firefly sculpture on the picture below.
To use Magic Sculp, you simply mix equal parts of the resin and hardener, then knead together until a uniform color is obtained.
It can then be shaped, sculpted and smoothed with a wet finger or modeling tools.
It will harden in 1 1/2 to 3 hours.
Do not go into the jars with dirty hands - use separate tools! Even minute amount of the other ingredient will start the chemical reaction and will ruin all the entire jar of clay.
If you think you have sensitive skin, use gloves. If gloves are not an option, wash your hands promptly after you finish working with Magic Sculp with soap and water. Do not touch your face.
Magic sculpt is a 2 part epoxy putty, it comes in 2 containers. Once two ingredients are mixed (equal amounts), it hardens to rock-hard state. It takes about 1.5 hours for Magic Sculpt to start hardening (from the time of mixing) and it completely cures after 12 hours. It needs to be mixed well. To check whether it is properly mixed, here is a test that you can use.
Mix 2 parts, roll into a ball, flaten it into a pancake on flat surface. The two parts are of different color, but the mix should be one uniform color. If there is any kind of "marble effect", keep kneading. Here is the picture - the one on the top still needs mixing, the one on the bottom is good to go:
Magic Smooth - Magic Sculpt companion product - epoxy compound with a vaseline- or petroleum jelly-like consistency. A very useful product anytime you need a very strong glue at a spot where the working surface is small and the grip must be strong (consider repair of a broken porcelain figurine, for example). Petroleum jelly-like texture allows for it to get into smallest cracks as well as adhere tenaciously to almost any surface, including glass and metal. It is also great for filling small holes, anchoring nails, screws, rods, as well as miscellaneous household repairs of china, porcelain, dolls, etc. See the picture below - the goo on the toothpick is the Magic Smooth:
The curing process of magic sculpt epoxy involves a chemical reaction that hardens the putty and makes it permanent. This typically takes several hours to complete, depending on the thickness of the sculpted piece. Once cured, the epoxy becomes extremely tough and resistant to damage, making it suitable for both indoor and outdoor display. One advantage of magic sculpt epoxy is its ability to be sanded and sculpted further after it has cured. This allows artists to refine their artwork and make adjustments as needed. It can also be drilled, sawed, and carved, making it a versatile material for a range of applications. In addition to its sculpting properties, magic sculpt epoxy is also weather-resistant and can withstand exposure to the elements. This makes it a popular choice for outdoor sculptures and installations. Overall, magic sculpt epoxy offers artists and craftsmen a versatile and durable material for creating three-dimensional artwork. Its ease of use, ability to adhere to different surfaces, and durability make it a preferred choice for many professionals and hobbyists alike..
Reviews for "The Art of Creating Miniature Worlds with Magic Sculpt Epoxy"
1. Sarah - 1 out of 5 stars - I was really disappointed with the Magic Sculpt Epoxy. It promised to be easy to use and provide a strong hold, but it fell short on both counts. The epoxy was difficult to work with, didn't adhere well to the materials I was using, and it didn't dry as quickly as the packaging claimed. Overall, I found it to be a waste of money and time.
2. John - 2 out of 5 stars - The Magic Sculpt Epoxy didn't live up to my expectations. While it had good reviews, I found it to be quite messy and difficult to shape. It also took longer to dry than anticipated, which was frustrating. Additionally, once it finally dried, the final result was not as strong as I had hoped for. I ended up having to find an alternative product to complete my project.
3. Emily - 1 out of 5 stars - I regret purchasing the Magic Sculpt Epoxy. It claimed to be a versatile and strong adhesive, but it didn't deliver. The epoxy was sticky and challenging to mix properly. It also didn't bond well to the surfaces I was trying to seal. I had to reapply it multiple times, only to have it fail again. I wouldn't recommend this product to anyone seeking a reliable epoxy for their projects.
4. Mike - 2 out of 5 stars - The Magic Sculpt Epoxy didn't live up to the hype for me. I found it difficult to work with and shape according to my requirements. The consistency was inconsistent, making it challenging to achieve a smooth finish. Additionally, it didn't provide the strength and durability I needed for my project. It may work better for some, but it didn't meet my expectations.
5. Lisa - 1 out of 5 stars - I was extremely disappointed with the Magic Sculpt Epoxy. It claimed to be easy to use and provide excellent adhesion, but I found it to be messy and time-consuming. The working time was too short, and the epoxy didn't bond well with the materials I was using. I had high hopes for this product, but it fell flat for me. I won't be repurchasing or recommending it to others.